commercial door styles

Commercial Chain Gate Products

Inexpensive access control for smaller openings on buildings

retrofit fire door operator guide

Commercial Doors Direct Chain Gates are fabricated from horizontal and vertical rows of interconnected chain links in a square pattern suspended from a top track.  They are typically used as easily operated collapsible sliding enclosures on truck trailers, but can be adapted to provide inexpensive access control for smaller openings on buildings as well  

  • MAXIMUM SIZE 99 in. wide, 115 in. high
  • MOUNTING Face mount (above the header) or between-jamb mount (below the header)
  • GATE BODY Square pattern from vertica| and horizontal rows of 2I0 link chain, 3/16" thick, on 7" centers (bottom 3 horizontal rows are on 4" vertical centers); body is attached to lead and rear bars with steel rivet hooks: top of gate is fitted with top rings
  • LEAD & REAR BARS 3/16" steel angles
  • TOP BAR 1 5/16" OD steel tube fitted over cast ductile iron mounting bracket
  • TOP RINGS Specially formed steel rings attached to top of gate body and lead bar to slide along top bar
  • OPERATION Single Slide - stack left side / latch right side
  • LOCKING Caat ductile iron housing on lead bar with integral self-latching handle suitable for padlocking
  • FINISH Zinc plated gate body with silver color prime paint finish on other steel and iron parts
  • WARRANTY One year limited warranty (excluding finish)

Chain Gates PDF Brochures

retrofit fire door operator guide

Copyright © 2012 Doors Direct - Commercial Doors Direct Terms and Conditions - View Sitemap

call us today